The NMEA protocol handler parses the NMEA 0183 protocol (f.e. from GPS devices). For input both GenericPush and GenericPull can be used in combination with File or UDP transport handler. This protocol can also be used for output, to write NMEA sentences.
Supported Sentences
- DPT
- GGA
- GLL
- HDG
- HDT
- MTW
- MWV
- RMC
- RPM
- RSA
- TTM
- VBM/VBO (AIS)
- VTG
Options
- delay: Delay of reading in milliseconds (Only in GenericPull mode)
Example
PQL
NMEA Protocol Handler
/// Read from File input = ACCESS({source='FileInput', wrapper='GenericPull', transport='File', protocol='NMEA', dataHandler='KeyValueObject', options=[['filename','...'], ['delay','100']] }) /// Read from UDP on Port 4711 inputGps = ACCESS({source='GpsInput', wrapper='GenericPush', transport='UDPServer', protocol='NMEA', dataHandler='KeyValueObject', options=[['port', '4711']] }) /// UDP Broadcast on Port 6003 output = SENDER({sink='SinkGps', wrapper='GenericPush', transport='UDPClient', protocol='NMEA', dataHandler='KeyValueObject', options=[['host', '255.255.255.255'],['port', '6003']] }, inputGps)
CQL
NMEA Protocol Handler
TODO