The NMEA protocol handler parses the NMEA 0183 protocol (f.e. from GPS devices). For input both GenericPush and GenericPull can be used in combination with File or UDP transport handler. This protocol can also be used for output, to write NMEA sentences.
ID | Description | Fields |
---|---|---|
DPT | Depth of Water | depth, offset |
GGA | Global Positioning System Fix Data. Time, Position and fix related data | time, latitude, latitudeHem, longitude, longitudeHem, gpsQuality, numberOfSattelites, horizontalDilution, antennaAltitude, antennaAltUnits, geoidalSeparation, geoidalSepUnits, ageOfDgps, differentialRefId |
GLL | Geographic Position – Latitude/Longitude | latitude, latitudeHem, longitude, longitudeHem, time, status |
HDG | Heading - Deviation & Variation | heading, deviation, deviationDir, variation, variationDir |
MTW | Water Temperature | degrees, unit |
MWV | Wind Speed and Angle | angle, reference, speed, speedUnit, status |
RMC | Recomended Minimum Navigation Information | time, status, latitude, latitudeHem, longitude, longitudeHem, speedOverGround, trackMadeGood, date, magneticVariation, magneticHem, signalIntegrity |
RPM | Revolutions | source, number, speed, pitch, status |
RSA | Rudder Sensor Angle | starboard, sbStatus, portboard, pbStatus |
TTM | Tracked Target Message | targetNumber, targetDistance, bearing, bearingUnit, targetSpeed, targetCourse, courseUnit, closestPointOfApproach, timeUntilClosestPoint, distanceUnit, targetLabel, targetStatus, referenceTarget, time, typeAcquisition |
VDM | AIS (Automatic Identification System) Message | fragmentsCount, fragmentId, messageId, channel, message, fillBits |
VDO | Same as VDM for own ship | see VDM |
VTG | Track Made Good and Ground Speed | headingTrack, trackReference, headingMagnetic, magneticReference, speedKnots, speedKnotsUnits, speedKilometers, speedKilometersUnits |
/// Read from File input = ACCESS({source='FileInput', wrapper='GenericPull', transport='File', protocol='NMEA', dataHandler='KeyValueObject', options=[['filename','...'], ['delay','100']] }) /// Read from UDP on Port 4711 inputGps = ACCESS({source='GpsInput', wrapper='GenericPush', transport='UDPServer', protocol='NMEA', dataHandler='KeyValueObject', options=[['port', '4711']] }) /// UDP Broadcast on Port 6003 output = SENDER({sink='SinkGps', wrapper='GenericPush', transport='UDPClient', protocol='NMEA', dataHandler='KeyValueObject', options=[['host', '255.255.255.255'],['port', '6003']] }, inputGps) |
TODO |